*Max flow rates [m3/h] are calculated based on clean water with a filtration degree of 120μm. With the same IN/OUT connection and the same MAX flowrate, the larger filter will require less cleaning than the smaller one.

**Filtering surface [cm2]

***M = Minimum free space required for maintenance.

*Max flow rates [m3/h] are calculated based on clean water with a filtration degree of 120μm. With the same IN/OUT connection and the same MAX flowrate, the larger filter will require less cleaning than the smaller one.

**Filtering surface [cm2]

***M = Minimum free space required for maintenance.

PES Filterkit:

Composed by an AISI 316 Stainless Steel cylinder within which a polyester (PES) filter tissue in inserted, its wide array of available filtering tissues and allows the customer to choose from various filtration degrees starting from 25μm up to 810μm.

2LAY Filterkit:

Composed by a double layer stainless steel AISI 316 mesh, this type of filtering element is very resistant and proves to be an extremely valid alternative to PES FILTERKIT when it comes to harsh operating conditions, especially when sharp or cutting suspended solids might be present in the liquid.

m-swipe can be equipped with a differential pressure control kit which detects the pressure difference between the filter’s inlet and outlet connections.

This greatly facilitates maintenance operations by measuring the degree of clogging of the filtering element and helps the operator to plan its replacement.