Home » Products » dolphin water filters » Manual brush filter

m-swipe is a manual brush filter in stainless steel with a manually-operated Brush clening system which allows the operator to easily clean the filtering screen in a matter of seconds without opening the cover.

The filter´s vessel and cleaning system are completely made of stainless steel supplemented with Nylon Brushes which makes the filter very robust and low-maintenance.

It is ideal to treat water loaded with non-colloidal suspended solids and is usually implemented in irrigation systems, well-water, canals, rivers or industrial applications

Available in 2 different constructive shapes, Y and L, in order to adapt to different installation layouts.

Design data

Flow rateUp to 400 m3/h
Design pressure [bar]PN 10 (PN16 available)
Max Temperature [°C]80
Salinity [TDS]<10.000 ppm
pH range3 - 9
Design CodePED 68/2014/EU

Material

Filter HousingStainless steel AISI 304/AISI 316L
GasketEPDM*
Drain/Vent valveNickel-plated Brass/AISI316L
Pressure GaugesStainless steel AISI 304/AISI 316L
Surface finishMicro shot Peening and Passivation

* Certified for the following European Drinking Water regulations: UBA, DVGW-standard W-270, WRAS och ACS.

MODELSIZEIN/OUTMAX F.*F.S.**DLHCS1ØSRM***W [Kg]
M-SPH 2" Y 662" BSPP3015004127406002192401" BSPP14050021
M-SPH 3" Y 662" BSPP6015004647656152192401" BSPP14050022
M-SPH 80 Y 66DN806015004877656152192401" BSPP14050026
M-SPH 100 Y 66DN10010015005478076272192401" BSPP14050028
M-SPH 3" Y 883" BSPP7022004648757482192401” ½ BSPP14070026
M-SPH 80 Y 88DN807022004878747482192401” ½ BSPP14070030
M-SPH 100 Y 88DN10011022005479167612192401” ½ BSPP14070032
M-SPH 100 Y 1818DN10012033005809557882732401” ½ BSPP18070039
M-SPH 150 Y 1818DN15024033006609789782732401” ½ BSPP18070044
M-SPH 100 Y 3030DN100120540058011719782732552" BSPP180100047
M-SPH 150 Y 3030DN1502605400660119410062732552" BSPP180100052

*Max flow rates [m3/h] are calculated based on clean water with a filtration degree of 120μm. With the same IN/OUT connection and the same MAX flowrate, the larger filter will require less cleaning than the smaller one.

**Filtering surface [cm2]

***M = Minimum free space required for maintenance.

MODELSIZEIN/OUTMAX F.*F.S.**D1D2LHCS1S2ØSRM***W [Kg]
M-SPH 2" L 662" BSPP3015001903108543902192402681" BSPP14050021
M-SPH 3" L 663" BSPP6015001903108543902192402681" BSPP14050022
M-SPH 80 L 66DN806015002103108544102192402681" BSPP14050027
M-SPH 100 L 66DN10010015002103108544102192402681" BSPP14050028
M-SPH 3" L 883" BSPP70220019031010083902192404221” ½ BSPP14070026
M-SPH 80 L 88DN8070220021031010084102192404221” ½ BSPP14070031
M-SPH 100 L 88DN100110220021031010084102192404221” ½ BSPP14070032
M-SPH 100 L 1818DN100120330024635010624802732404221” ½ BSPP18070039
M-SPH 150 L 1818DN150240330024635010624802732404221” ½ BSPP18070044
M-SPH 100 L 3030DN100120540024635013684802732557282" BSPP180100047
M-SPH 150 L 3030DN150260540024635013684802732557282" BSPP180100052
M-SPH 200 L 3030DN200400540024635013685002732557282" BSPP180100057

*Max flow rates [m3/h] are calculated based on clean water with a filtration degree of 120μm. With the same IN/OUT connection and the same MAX flowrate, the larger filter will require less cleaning than the smaller one.

**Filtering surface [cm2]

***M = Minimum free space required for maintenance.

PES Filterkit:

Composed by an AISI 316 Stainless Steel cylinder within which a polyester (PES) filter tissue in inserted, its wide array of available filtering tissues and allows the customer to choose from various filtration degrees starting from 25μm up to 810μm.

2LAY Filterkit:

Composed by a double layer stainless steel AISI 316 mesh, this type of filtering element is very resistant and proves to be an extremely valid alternative to PES FILTERKIT when it comes to harsh operating conditions, especially when sharp or cutting suspended solids might be present in the liquid.

differential manometer kit

m-swipe can be equipped with a differential pressure control kit which detects the pressure difference between the filter’s inlet and outlet connections.

This greatly facilitates maintenance operations by measuring the degree of clogging of the filtering element and helps the operator to plan its replacement.

While Heation AB has made every effort at the time of publication to ensure the accuracy of the information provided herein those are all subject to changes or inaccuracies. Images displayed are for illustration purposes only.
Please contact us for product specific information.